Ground floor

Item

1

IRON SS SHUTTER AT gates

iron shutter/ sliding. A SS sliding gate at gate number 1, 6, 12 and 7.

1

16.5’ x 9’6”

GATE NUMBER 1.

2

GATE NUMBER 7.

1

23’6” x 9’6”

3

GATE NUMBER 6

1

4’6” X 11’6”

4

BEFORE GATE NUMBER 12.

1

4’6” X 11’6”

5

reception table

Table: (5’ x 2’ x 2’6”) providing and fixing of tables straight made up of 18mm thick ply+ laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish, laminate at top. there shall be provision low height storage spaces.

upper cabinet: 2 cabinet: 1’3” wide & 3’ length & 3’ height without door. with drawers. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour. install at 4’6” height.

lower cabinet: 2 cabinet: 1’8” wide & 3’ length & 2’6” height. with drawers and door. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour.

1

5’ x 2’ x 2’6”

6

3-seater sofa at waiting area

providing and fixing of 3-seater sofas finished with fabric of approved shade & pattern, supported on wooden legs. covered with top-quality imported faux leatherette/ fabric. contemporary design of elegance and comfortable & upholstery fabrics colour/patterns as per approved.spong: high quality polymeric urethane foam 1.4 minimum density as the difference part , seat and back. spring: imported spring for strong support.

2

6’ wide

7

2-seater sofa at waiting area

providing and fixing of 2-seater sofas finished with fabric of approved shade & pattern, supported on wooden legs. covered with top-quality imported faux leatherette/ fabric. contermporary design of elegance and comfortable & upholstery fabrics colour/patterns as per approved.spong: high quality polymeric urethane foam 1.4 minimum density as the difference part , seat and back. spring: imported spring for strong support.

1

5’ wide

8

kiosk

kiosk platform wooden. the platform has space to write and keep the docs on paper.

upper cabinet: 2 cabinet: 1’3” wide & 3’ length & 3’ height without door. with drawers. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour. install at 4’6” height.

lower cabinet: 2 cabinet: 1’8” wide & 3’ length & 3’ height. with drawers and door. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour.

1

5‘ wide and 1’9” wide

9

cash counter

Cash Counter,

partition wall:  ~5’ wide & 10’ length, heighted side partition wall 2 side (wood and glass low heighted partition wall), door ~2’ wide, 1.5’ top glass (12mm toughened glass) and laminate finish, 12mm plywood.

front table (5’x2’9”x2’6”): table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish, a opening to collect the cash and receipt from client with a 6” wide stand platform and top on that a 1’6” glass (12mm) at front side, keyboard tray, under table storage cabinet.

side table: 1’6” wide & 3’ length side table with under table storage provision (3 drawer). table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish.

electricity and data connection: power and data cable connection provision including switches.

chairs: a chair for counter officer.

1

5’x2’9”x2’6”

10

bank counter

front table: (4’3”x2’9”x2’6”) table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface , also the legs are in solid wood with same polish, a opening to collect the documents and receipt from client with a 6” wide stand platform and top on that a 1’6” glass (12mm) at front side, keyboard tray, under table storage cabinet (2 drawers and openable combination). with once side partition wood & glass wall between another chair.

electricity and data connection: power and data cable connection provision including switches. All the connection will be provided below the table and need to provide a circular opening to get the wires on the desk.

chairs: a chair for counter officer.

4

4’3”x2’9”x2’6”

11

officer table

front table (6’x2’9”x2’3”): table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish, keyboard tray, under table storage cabinet.

side table: 1’6” wide & 3’ length side table with under table storage provision (3 drawers). table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish

power and data cable connection provision including switches.

chairs: a officer chair for officer and 2 chairs for visitors.

Note: this table may have monolithic table top as L shape table.  That’s depend upon the location.

electricity and data connection: power and data cable connection provision including switches. All the connection will be provided below the table and need to provide a circular opening to get the wires on the desk.

2

4’3”x2’9”x2’3”

12

WORK DESK 26

front table (7’x2’6”x2’3”): table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish, keyboard tray, under table storage cabinet.

electricity and data connection: power and data cable connection provision including switches. All the connection will be provided below the table and need to provide a circular opening to get the wires on the desk.

chairs: a chair for OFFICE WORKING STAFF.

upper cabinet: 2 cabinet: 1’3” wide & 2’4” length & 3’ height without door. with drawers. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour. install at 4’6” height.

13

upper cabinet  AT officer DESK02

upper cabinet: (2 cabinet): 1’3” wide & 2’5” length & 3’ height without door. with drawers. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour. install at 4’6” height.

2

14

branch manager OFFICE FURNITURE

front table (5’6”x2’9”x2’3”): table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish keyboard tray, under table storage cabinet.

side table: 1’9” wide & 3’ length &2’3” HIGH side table with under table storage provision (3 drawers). table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish

electricity and data connection: power and data cable connection provision including switches. All the connection will be provided below the table and need to provide a circular opening to get the wires on the desk.

upper cabinet: (2 cabinet): 1’3” wide & 3’ length & 3’ height. AND 1’3” wide & 3’ length & 3’ height. with drawers and door. made from 12mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour. install at 4’6” height.

lower cabinet: 1’8” wide & 4’6” length & 2’6” height. with drawers and door. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour.

chairs: a officer chair for branch manager and 2 chairs and a sofa for visitors.

1

5’5”x3’x2’3”

these tables can be monolithic table top as L shape table.

15

wall panel in branch office

wall panels: MDF designed panel or readymade wall design panel + DUCO paint on panels in branch officer. wide 15’ and height 9’6”.

1

15’x9’6”

16

Window curtains

Horizontal or vertical Polyester Strip sliding/revolving curtains for windows as per the selection.

6

5’x5’

17

glass partition wall in branch office

providing and fixing of 25mmx25mm metal framing with 12mm thick fluted or frosted designed toughened glass, height 7’, length 11’6”.

glass door: 3’ wide, 7’ height: Providing and fixing frameless door glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Enox / Fluid / CNR make single leg spider, ceiling/bottom to glass connector, glass to glass connector, handle, doorset, floor spring, pivot etc, all the necessary fittings upto all height including scaffolding all complete as shown in drawing.

Door number: 08.

1

11’6”x7’

18

glass partition wall in branch manager office

providing and fixing of 25mmx25mm metal framing with 12mm thick fluted or frosted toughened glass and plywood, height 7’, length 11’6”

1

11’6” x 7’

19

glass partition wall and glass door for branch loan office.

providing and fixing of 25mmx25mm metal framing with 12mm thick fluted or frosted toughened glass or fluted glass and plywood, height 7’, length 11’6”.

Glass Door : Providing and fixing frameless door glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Enox / Fluid / CNR make single leg spider, ceiling/bottom to glass connector, glass to glass connector, handle, doorset, floor spring, pivot etc, all the necessary fittings upto all height including scaffolding all complete as shown in drawing.

Door number: 08. Door size 2’8” x 7’.

1

20

branch loan officer office

front table (6”x2’9”x2’3”): table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish keyboard tray, under table storage cabinet.

side table: (2’9”x1’9”x2’6”) 1’9” wide & 2’9” length side table with under table storage provision (3 drawers). table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish

electricity and data connection: power and data cable connection provision including switches. All the connection will be provided below the table and need to provide a circular opening to get the wires on the desk.

chairs: a officer chair for branch loan officer and 2 chairs and a sofa for visitors.

1

these tables can be monolithic table top as l shape table.

21

lower cabinet at branch loan office

lower cabinet: (2CABINETS) 1’6” wide & 3’ length & 2’6” height. with drawers and door. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour

2

22

 upper cabinet at branch loan office

upper cabinet: (2CABINETS) 1’3” wide & 3’ length & 3’ height. with door. install at 4’6” height. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour

2

23

branch loan office worker desk

work table (4’x2’6”x2’3”): table top with laminate or PUfinish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish keyboard tray, under table storage cabinet.

chairs: a chair for branch manager and 2 chairs and a sofa for visitors.

electricity and data connection: power and data cable connection provision including switches.

2

24

wall panel in branch loan officer office

wall panels: MDF designed panel or readymade wall design panel + DUCO/PU paint panels in branch officer. wide 9’4” and height 9’6”.

1

9’4”x9’6”

25

Double door (glass door).

Providing and fixing frameless door glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Enox / Fluid / CNR make single leg spider, ceiling/bottom to glass connector, glass to glass connector, handle, doorset, floor spring, pivot etc, all the necessary fittings upto all height including scaffolding all complete as shown in drawing.

Door number: 06.

1

~4’7” wide 7’

26

Wooden door at washroom , ups room and and store room

Providing & Fixing of Single both side Laminate finish Flush door Made from cutting in 35mm thick Flush door as per drawing as per Drawing with shall be fixed with beading patti finished in melamine polish or laminate with both side laminated finished with required beading for edge seal with polish, & laminated door jems line & Shutter to be fixed in door frame  (76mmx 63mm TW) with 4 nos heavy duty hinges of approved brand with Approved SS matt finished 600mm long 25 mm dia handle on both side of door , with necessary hardware like door stoper, Enox make Door closer, etc. Complete as per design.

Door number: 3,4,5 , 9, 10, 11, 13, 14, 15, 16, 17, 18, 43.

3

~2’8” wide, height 7’

Door without fram

27

Wooden door at record room

Providing & Fixing of double panel door both side Laminate finish Flush door Made from cutting in 35mm thick Flush door as per drawing as per Drawing with shall be fixed with beading patti finished in melamine polish or laminate with both side laminated finished with required beading for edge seal with polish, & laminated door jems line & Shutter to be fixed in door frame  (76mmx 63mm TW) with 4 nos heavy duty hinges of approved brand with Approved SS matt finished 600mm long 25 mm dia handle on both side of door , with necessary hardware like door stoper, Enox make Door closer, etc. Complete as per design.

Door number: 12

1

~4’6” x 7’

28

Partition wall panel for storage area (full height)

providing and fixing of 75mm thick solid partition with 50mmx 50mm aluminium framing with bison board on each side. finish material pop sheet on partition wall or MDF designed panel or readymade wall design panel + DUCO paint on (as per selection).

wall panel for/between hardware storage room, record room, stationary room and branch record room. height 11’6”, length ~ 68’

1

height 11’6”, length ~ 68’

29

tall storage unit

a full height storage cabinet and having 450 mm depth and 3’ wide & 9’5” heighted made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour. width may vary as per size condition.

THERE WELL BE ONE LOWER STORAGE WITH 7’ HEIGHT WITH DOORS AND REMAINING WILL BE UPPER STORAGE WITH DOORS.

~20

18” DEEP, 3” WIDE AND 9’6” TALL.

30

TEA TABLE IN Waiting area

TEA table top with GLASS or VNEER FINISH finish on outer surface also the legs are in solid wood with same polish. oval shape

2

~3’x1’9”

31

DRESSING MIRROR IN LOCKER AND WASHROOM

DRESSING: MIRROR (2’6” WIDE AND 3’ HEIGHT) WITH WODDEN FRAME AND table ( 3’ X 1’6” X2’6”) top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood, WITHOUT storage cabinet. AND A STOOL WITH SOLID LEGS.

1

32

MIRROR IN WASHROOM

MIRROR (4’ WIDE AND 3’ HEIGHT) WITH WODDEN FRAME.

2

4’X3’

Electrical 1^ST FLOOR

33

4 way ac

4 way ac, 2.5 or 3ton 4 way AC providing & fixing refrigerant copper piping cassette AC laid between indoor as per rbi/government guideline. with installation, switches, wiring, piping and all accessories. AC must have 2 parallel running heavy duty wire as, with copper pipes with proper covering as per the capacity of AC.
guideline example: providing & fixing refrigerant copper piping cassette AC laid between indoor & outdoor unit as per oem's specifications duly insulated with class "o" fire retardant sleeve type elastomeric nitrite rubber insulation. the item also includes copper electrical flexible cable of appropriate size. ALU. foil membrane shall be applied to provide resistance against breakdown due to uv radiation for exposed portion of the rubber insulation with nitrogen testing (totally sealed - in case of proposed machine). it shall be in total clamping manner above false ceiling & in total concealed manner below false ceiling level. from the structural ceiling it should hanged or shall be fixed on wall / beam etc. with clamps & the distance between two clamp shall be less than 1 meter. it shall not be placed over the false ceiling nor it shall be fixed with false ceiling members. the diameter / gauge of the ref. pipe shall be as per the specifications of the manufacturing company (OEM) only for each type of machine. the above item include the cost of 3 core copper flexible electrical cable as recommended by manufacturing company

4

2.5 or 3ton

34

split ac AT branch manager office and branch loan office.

split ac: 1ton AC providing & fixing refrigerant copper piping cassette AC laid between indoor as per RBI/government guideline. at branch manager and branch loan office. with installation, switches, wiring, piping and all accessories. AC must have 2 parallel running heavy duty wire as, with copper pipes with proper covering as per the capacity of AC. AC compressor will we on mounted outside.

2

35

led panel

a good quality led light panel of 2 feet x 2 feet backlit panel, natural white, recessed panel for false-ceiling / pop ceiling.

14

36

led ceiling light

15w (12 to 18w as light led ceiling panel as per requirement), backlit panel, natural white, recessed panel for false-ceiling / pop ceiling. with installation, wiring & switches.

65

37

track lights

track lights: 20w/m led track light or spot track light with track rail/patti included/adjustable metal ceiling spotlight/matte black finish.

3

AS PER THE DRAWING APROX LEGTH IS 13M.

38

led bulb IN WHASROOMS AND STAIRS

8w (5w to 12w as light led bulbs as per requirement), natural white, installation, switches, wiring and bulb holder.

11

39

fan

a high speed fan installation and with installation, wiring & switches.

14

1200mm

40

Electrical panel and UPS room

A wooden box for electrical panel, a desk/box for UPS and racks to keep batteries as per Government of India guideline.

1

41

Wire from electricity generator to electrical panel

Electricity wire connection from generator to electrical board room, approx. length of wire will be 75’.

1

42

pop ceiling

pop ceiling. providing and fixing suspended false ceiling made out of 12.0 mm (approx.) thick pop plaster boards of Indian gypsum or equivalent made G.I. standard section framework in the pattern and design directed by the bank engineer. tache G.I. section frame work shall be tied to the roof and walls with the anchor fastener screws/bolts of appropriate size recommended by the Indian gypsum. the boards shall be fixed to the frame work with the screws and the joints shall be flushed and finished with requisite jointing compounds paper tapes etc.

as per the drawing, aprox 1400

43

wooden panelled ceiling

wooden patti ceiling with ALU. frame and plywood 8mm thick solid wood patti with polish finish considered. or it can PVC ceiling with ALU. frame and plywood.

as per the drawing. approx 200 SQFT

44

grid false ceiling

providing & fixing of mineral fiber acoustical suspended ceiling system with 15mm tiles and exposed grid. the tiles should have humidity resistance (rh) of 90% - 99%, nrc 0.5, light reflectance ≥87%, thermal conductivity k = 0.052 - 0.057 w/m k, colour white, fire performance uk class 0 / class 1 (bs 476 pt - 6 &7) in module size of 600 x 600 x 16mm, suitable for green building application, with recycled content of 30% - 45%.

the installation to comprise main runner spaced at 1200mm centre securely fixed to the structural soffit using us boral /

gyproc / armstrong suspension system (specifications below) at 1200mm maximum centre.  the first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. flush fitting 1200mm long cross tees to

be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.  cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.  perimeter trim to be wall an

gles of size 3000mm x 19mm x 19mm, secured to walls at 450 mm maximum centre.

1561

as per the drawing. APROX 1400 SQFT.

45

PAINT (WALLS)

Providing & applying 3 coats of 1st quality Plastic paint (ICI Dulux / Asian valvet touch) of approved shade with two coats of putty, two coats of approved primer, and three coats of approved  plastic paint,  including preparation of surface, scrapping, sand papering, scaffolding, all materials and labour, taxes etc complete. as approved by Engg.-in-Charge/ Designer Putty should be of asian, Paint should be Low Volatile Organic Compound level as per standered Applicable (24.14 to 55.62 Gr/Ltr) done as per directed by engineer in charge. 

AS PER THE DRAWING, Aprox 6000 SQFT.

46

PAINT (ON FALL CEILING AREA)

Providing & applying 3 coats of 1st quality Plastic paint (ICI Dulux / Asian valvet touch) of approved shade with two coats of putty, two coats of approved primer, and three coats of approved  plastic paint,  including preparation of surface, scrapping, sand papering, scaffolding, all materials and labour, taxes etc complete. as approved by Engg.-in-Charge/ Designer Putty should be of asian, Paint should be Low Volatile Organic Compound level as per standered Applicable (24.14 to 55.62 Gr/Ltr) done as per directed by engineer in charge. 

AS PER THE DRAWING OR APROX 300

47

Water cooler

Blue Star 20 Litter Stainless Steel Water Cooler Sdlx2020 with 20 Litter Cooling,20 Litter with water purifier with 50 LPH purification rate, need to be in close case.

1

48

CCTV

CCTC AND ITS WIRING AS PER RBI/GOVERNMENT OF INDIA REGULATION.

9

49

exhaust fan in washroom

exhaust fan with wire and switch. LOCATION IS, 6 IN WASHROOM.

6

First floor

50

officer table

l shape table:

front table: (ON AN AVERAGE THE DIMENTIONS ARE 6’ LONG, 2’8” WIDTH AND HEIGHT 2’3”) table top with laminate or PUfinish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish, keyboard tray, under table storage cabinet. the side of table is mentioned in the layout drawing

side table: (ON AN AVERAGE THE DIMENTIONS ARE 3’ LONG, 1’6” WIDTH AND HEIGHT 2’3”) the side of table is mentioned in the layout drawing. the table with under table storage provision (3 drawers). table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish.

electricity and data connection: power and data cable connection provision including switches. All the connection will be provided below the table and need to provide a circular opening to get the wires on the desk.

chairs: a officer chair for officer and 2 chairs for visitors.

10

as per the drawing.

it includes all the departmental head desks, 2 md desks.

these tables can have  monolithic table top as l shape table.

51

CEO office desk.

L shape table:

front table (7’x3”x2’3”): table top with veneer + polish or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish keyboard tray, under table storage cabinet.

side table: 1’9” wide & 3’ length side table with under table storage provision (3 drawers). table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish.

electricity and data connection: power and data cable connection provision including switches.

upper cabinet: 1’3” wide & 3’ length & 3’ height. with door. install at 4’6” height.

chairs: a officer chair for branch manager and 4 chairs for visitors.

Tea table: table top with GLASS or VNEER finish on outer surface also the legs are in solid wood with same polish. oval shape (3’6” x 1’9”)

1

these tables can be monolithic table top as l shape table.

52

office staff desk

front table: table top with laminate or PU finish on outer surface and 1mm thick laminate in internal surface, also the legs are in solid wood with same polish, keyboard tray, under table storage cabinet. the side of table is mentioned in the layout drawing. there are 4 double tables which will be used from both sides.

electricity and data connection: power and data cable connection provision including switches. All the connection will be provided below the table and need to provide a circular opening to get the wires on the desk.

chairs: a chair for office staff.

single and corner tables 23, double tables 4.

as per the drawing.

53

pop ceiling

pop ceiling. providing and fixing suspended false ceiling made out of 12.0 mm (approx.) thick pop plaster boards of indian pop or equivalent made g.i standard section framework in the pattern and design directed by the bank engineer. tache g.i. section frame work shall be tied to the roof and walls with the anchor fastener screws/bolts of appropriate size recommended by the indian pop. the boards shall be fixed to the frame work with the screws and the joints shall be flushed and finished with requisite jointing compounds paper tapes etc.

as per the drawing or aprox 700 SQFT.

54

wooden panelled ceiling

wooden patti ceiling with ALU. frame and plywood 8mm thick solid wood patti with polish finish considered.

second option: acp (aluminium composite panel) ceiling in branch office area. wooden patti ceiling with aluminium frame plywood and 8mm thk solid wood patti with polish finish considered.

as per the drawing OR aprox 200 sqft.

55

grid false ceiling

providing & fixing of mineral fiber acoustical suspended ceiling system with 15mm tiles and exposed grid. the tiles should have humidity resistance (rh) of 90% - 99%, nrc 0.5, light reflectance ≥87%, thermal conductivity k = 0.052 - 0.057 w/m k, colour white, fire performance uk class 0 / class 1 (bs 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for green building application, with recycled content of 30% - 45% .

the installation to comprise main runner spaced at 1200mm centre securely fixed to the structural soffit using us boral /

gyproc / armstrong suspension system (specifications below) at 1200mm maximum centre.  the first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. flush fitting 1200mm long cross tees to

be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.  cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.  perimeter trim to be wall an

gles of size 3000mm x 19mm x 19mm, secured to walls at 450 mm maximum centre.

as per the drawing or aprox 2900

56

tall storage unit

a full height storage cabinet and having 450 mm depth and 3’ wide & 9’5” heighted made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour. width may vary as per site condition.

5 double door and 2 single door cabinmates.

as per the drawing.

57

lower cabinet:

lower cabinet: 2’ wide & 3’ length & 2’6” height. with drawers and doors. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour

16

Average wide 3’, depth 2’ and height 2’8”.

58

upper cabinet

upper cabinet: 1’3” wide & 3’ length & 3’ height. with doors. install at 4’6” height. made from 18mm thick plywood. all side finished with 1.0 mm thick laminate of approved shade on the exterior side as per design of approved colour and the inner surface and divisions are finished with 0.8 mm thick laminate of approved colour.

16

Average wide 3’, depth 1’3’ and height 3’.

59

glass partition wall for md1, md2 , CEO, loan recovery office.

providing and fixing of 25mmx25mm metal framing with 12mm thick fluted or frosted toughened glass or fluted glass and plywood, height 7’, length 11’6”. Exclude 4 Glass door (2’9” to  3’ wide and 7’ heighted, please refer drawing for more clarity)

1

72’ long wall.

60

Single glass door

Providing and fixing frameless door glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Enox / Fluid / CNR make single leg spider, ceiling/bottom to glass connector, glass to glass connector, handle, doorset, floor spring, pivot etc, all the necessary fittings upto all height including scaffolding all complete as shown in drawing.

Door number: 24, 25, 34 and 35.

4

2’9” wide

61

Double door (glass door).

Providing and fixing frameless door glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Enox / Fluid / CNR make single leg spider, ceiling/bottom to glass connector, glass to glass connector, handle, doorset, floor spring, pivot etc, all the necessary fittings upto all height including scaffolding all complete as shown in drawing.

Door number: 33, 36 and 19.

3

~4’7” wide

62

Sliding door to server room

Providing & Fixing of Single sliding both side Laminate finish Flush door Made from cutting in 35mm thick Flush door as per drawing as per Drawing with shall be fixed with beading patti finished in melamine polish or laminate with both side laminated finished with required beading for edge seal with polish, & laminated door jems line & Shutter to be fixed in door frame  (76mmx 63mm TW) with heavy duty slider of approved brand with Approved SS matt finished 600mm long 25 mm dia handle on both side of door , with necessary hardware like door stoper, Enox make Door closer, etc. Complete as per design.

Door number: 37.

1

~2’3” wide, height 7’

63

Wooden door at washroom and server room

Providing & Fixing of Single both side Laminate finish Flush door Made from cutting in 35mm thick Flush door as per drawing as per Drawing with shall be fixed with beading patti finished in melamine polish or laminate with both side laminated finished with required beading for edge seal with polish, & laminated door jems line & Shutter to be fixed in door frame  (76mmx 63mm TW) with 4 nos heavy duty hinges of approved brand with Approved SS matt finished 600mm long 25 mm dia handle on both side of door , with necessary hardware like door stoper, Enox make Door closer, etc. Complete as per design.

Door number: 31, 20, 21, 22, 23, 41, 42, 32

8

~2’6” wide, height 7’

64

wall panel in md1, md2, CEO, loan recovery and admin department office

wall panels: MDF designed panel or readymade wall design panel + DUCO/PU paint panels on column at office staff area and waiting area. At ceiling level, a LED profile light. Led strip must have minimum 60 LEDS per meter. Mdf panel as per the as per design. height 9’6” and column periphery is 7’4”.

10

7’4”x9’6”

65

PARTITION wall (full height) at loan recovery office and between MD1 and MD2 offices.

providing and fixing of 75mm thick solid partition with 50mmx 50mm aluminium framing with bison board on each side. finish material pop sheet on partition wall OR readymade wall design panel + DUCO paint on (as per selection).

wall panel for/between hardware storage room, record room, stationary room and branch record room. height 11’6”

1

25’6”x11’6”

66

PARTITION wall (half height,

(GLASS AND plywood) H= 5') staff seating space

partition wall:  partial heighted side partition wall (wood and glass low heighted partition wall), door ~2’ wide, 1.5’ top glass (12mm toughened glass) and laminate finish, 12mm plywood.

155’ long wall height 5’

67

Doors (for half heighted partition wall)

Doors for half height, H = 5’, GLASS AND plywood, doors are 33” wide. 18mm plywood with 1 mm laminate on to of that, door height 3.5’.

Door number: 26, 27, 28, 29 and 30.

5

68

3 seater sofa at waiting area and in CEO office

providing and fixing of 2-seater sofas finished with fabric of approved shade & pattern, supported on wooden legs. covered with top-quality imported faux leatherette/ fabric. contermporary design of elegance and comfortable & upholstery fabrics colour/patterns as per approved.spong: high quality polymeric urethane foam 1.4 minimum density as the difference part , seat and back. spring: imported spring for strong support.

4

9’ wide

69

2 seater sofa at waiting area and in MD1 and MD2 office

providing and fixing of 2-seater sofas finished with fabric of approved shade & pattern, supported on wooden legs. covered with top-quality imported faux leatherette/ fabric. contermporary design of elegance and comfortable & upholstery fabrics colour/patterns as per approved.spong: high quality polymeric urethane foam 1.4 minimum density as the difference part , seat and back. spring: imported spring for strong support.

6

~6’ wide (actual sizes as per the drawing)

70

L shape sofa at waiting area.

providing and fixing of 2-seater sofas finished with fabric of approved shade & pattern, supported on wooden legs. covered with top-quality imported faux leatherette/ fabric. contermporary design of elegance and comfortable & upholstery fabrics colour/patterns as per approved.spong: high quality polymeric urethane foam 1.4 minimum density as the difference part , seat and back. spring: imported spring for strong support.

1

(each side 5’ & 6’8”) (actual sizes as per the drawing)

71

Dining table in waiting area

Providing and fixing 18mm thk ply +1mm thk laminate and legs are in M.S. section as specified in detailed drawing including powder coating in specific colour. 2 tables 7’x2’4” and 1 table 4’x2’8”.

3

Size as per the drawing

72

TEA TABLE IN Waiting area

TEA table top with GLASS or VNEER FINISH finish on outer surface also the legs are in solid wood with same polish. oval shape

1

~3’x1’9”

73

PAINT (WALLS)

Providing & applying 3 coats of 1st quality Plastic paint (ICI Dulux / Asian valvet touch) of approved shade with two coats of putty, two coats of approved primer, and three coats of approved plastic paint,  including preparation of surface, scrapping, sand papering, scaffolding, all materials and labour, taxes etc complete. as approved by Engg.-in-Charge/ Designer Putty should be of asian, Paint should be Low Volatile Organic Compound level as per standered Applicable (24.14 to 55.62 Gr/Ltr) as per directed by engineer in charge. 

AS PER THE DRAWING or aprox 5800 SQFT.

74

PAINT (AT NON FALSE CEILING AREA)

Providing & applying 3 coats of 1st quality Plastic paint (ICI Dulux / Asian valvet touch) of approved shade with two coats of putty, two coats of approved primer, and three coats of approved plastic paint, including preparation of surface, scrapping, sand papering, scaffolding, all materials and labour, taxes etc complete. as approved by Engg.-in-Charge/ Designer Putty should be of asian, Paint should be Low Volatile Organic Compound level as per standered Applicable (24.14 to 55.62 Gr/Ltr) as per directed by engineer in charge. 

AS PER THE DRAWING OR APROX 300

75

Window curtains

Horizontal or vertical Polyester Strip sliding/revolving curtains for windows as per the selection.

16

5’x5’

76

2

13’x9’

77

1

16’x9’

78

MIRROR IN WASHROOM and CEO washroom

MIRROR (4’ WIDE AND 3’ HEIGHT) WITH WODDEN FRAME.

2

4’X3’

79

IRON SS SHUTTER AT gates

iron shutter/ sliding. A SS sliding gate at gate number 19 and 33.

2

4’9” x 7’

80

Water cooler

Blue Star 20 Litter Stainless Steel Water Cooler Sdlx2020 with 20 Litter Cooling,20 Litter with water purifier with 50 LPH purification rate, need to be in close case.

1

81

wall fan in IT SERVER cabinet

wall fan with wire, switches and all fitting accessories.

1

82

exhaust fan in washroom

exhaust fan with wire and switch. LOCATION IS, 2 IN WASHROOM And one in CEO cabin washroom.

3

electrical

83

4 way ac

4 way AC: 3ton 4 way AC providing & fixing refrigerant copper piping cassette AC laid between indoor as per RBI/government guideline. with installation, switches, wiring, piping and all accessories.
Note: AC must have 2 parallel running heavy duty wire running between compressor and cassette ac unit, with copper pipes with proper covering as per the capacity of AC. All 1st floor Ac compressor will be placed on terrace.

guideline example: providing & fixing refrigerant copper piping

cassette AC laid between indoor & outdoor unit as per oem's specifications duly insulated with class "o" fire retardant sleeve type elastomeric nitrite rubber insulation. the item also includes copper electrical flexible cable of appropriate size. ALU. foil membrane shall be applied to provide resistance against breakdown due to uv radiation for exposed portion of the rubber insulation with nitrogen testing (totally sealed - in case of proposed machine). it shall be in total clamping manner above false ceiling & in total concealed manner below false ceiling level. from the structural ceiling it should hanged or shall be fixed on wall / beam etc. with clamps & the distance between two clamp shall be less than 1 meter. it shall not be placed over the false ceiling nor it shall be fixed with false ceiling members. the diameter / gauge of the ref. pipe shall be as per the specifications of the manufacturing company (oem) only for each type of machine. the above item include the cost of 3 core copper flexible electrical cable as recommended by manufacturing company

6

3ton

84

split ac

split ac: 1ton split ac: providing & fixing refrigerant copper piping cassette AC laid between indoor as per rbi/government guideline. at branch manager and branch loan office. with installation, switches, wiring, piping and all accessories.

4

1 ton

85

split ac

split ac: 2ton split ac: providing & fixing refrigerant copper piping cassette AC laid between indoor as per rbi/government guideline. at branch manager and branch loan office. with installation, switches, wiring, piping and all accessories. at ceo office.

1

2 ton

86

led panel

a good quality led light panel of 2 feet x 2 feet backlit panel, natural white, recessed panel for false-ceiling / pop ceiling. IT INCLUDE ISI MARKERD SWITCHES, WIRING TO CONECTION POINT.

22

87

track lights

track lights: 20w/m led track light or spot track light with track rail/patti included/adjustable metal ceiling spotlight/matte black finish.

4

as per the drawing. APROX 47’ LONG TRACK.

89

led ceiling light

15w (12 to 18w as light led ceiling panel as per requirement), backlit panel, natural white, recessed panel for false-ceiling / pop ceiling. with installation, wiring & switches.

58

90

led bulb

8w (5w to 12w as light led bulbs as per requirement), natural white, installation, switches, wiring and bulb holder.

7

91

fan

a high-speed fan installation and with installation, wiring & switches.

14

1200mm

92

CCTV

CCTV and its wiring as per RBI/government of India regulation.

9

93

Connection and cabling for security system

Providing Connection and cabling for security system as per the client requirement at ground and first floor.